Hobby-Lobby
P-40 WARHAWK 300 ARF
A thrilling re-creation of the Flying Tigers' legendary fighter On paper, the P-40 was outclassed by many of the foes it faced. But in the hands of the pilots of the American Volunteer Group, the Warhawk was used to deadly effect against "superior" Zeros. Their exploits made the iconic shark-toothed grin of the "Flying Tigers" a symbol of victory for the Allies and cause for concern to any enemy pilot that encountered it. E-flite has captured the spirit of the Flying Tigers in this fun-to-fly re-creation of the P-40 that goes together fast and is small enough to fly in the park. It comes out of the box loaded with scale details like an authentic Flying Tigers paint scheme and molded panel lines. It also comes equipped with a factory-installed 300 BL outrunner motor that will provide plenty of power for warbird aerobatics like loops, rolls and Immelmans. Its simple 3-channel control setup means you only need to buy two servos, one for aileron and one for elevator, making it even more affordable to get flying. When you're not flying, you can show off its scale looks with the included static display stand. P-40 Warhawk 300 ARF Highlights: Molded foam construction with panel lines and other scale details Factory-applied Flying Tigers "shark mouth" paint scheme Factory-installed 300 BL outrunner motor with propeller Factory-installed empennage, control horns and servo links Simple aileron/elevator controls require just two servos Quick release wing attachment Magnetically secured canopy hatch Extra prop and spinner included Quick, easy assembly Attractive display stand included P-40 Warhawk Specs: Wingspan: 25.6 in. (650mm) Length: 21.7 in. (550mm) Wing Area: 108 sq in. (7.02 sq dm) Radio: 4+ channels Servos: E-flite S-60 Speed Control: 10-amp brushless Recommended Battery: 2S LiPo Needed to Complete: 4-channel transmitter, receiver, 2 servos, ESC, battery and charger. Technical Specifications: Length: 21.7" Wingspan: 25.6" Flying Weight: 7 oz. Controls: Aile,
A thrilling re-creation of the Flying Tigers' legendary fighter On ...Hobby-Lobby
P-40 WARHAWK 300 ARF
A thrilling re-creation of the Flying Tigers' legendary fighter On paper, the P-40 was outclassed by many of the foes it faced. But in the hands of the pilots of the American Volunteer Group, the Warhawk was used to deadly effect against "superior" Zeros. Their exploits made the iconic shark-toothed grin of the "Flying Tigers" a symbol of victory for the Allies and cause for concern to any enemy pilot that encountered it. E-flite has captured the spirit of the Flying Tigers in this fun-to-fly re-creation of the P-40 that goes together fast and is small enough to fly in the park. It comes out of the box loaded with scale details like an authentic Flying Tigers paint scheme and molded panel lines. It also comes equipped with a factory-installed 300 BL outrunner motor that will provide plenty of power for warbird aerobatics like loops, rolls and Immelmans. Its simple 3-channel control setup means you only need to buy two servos, one for aileron and one for elevator, making it even more affordable to get flying. When you're not flying, you can show off its scale looks with the included static display stand. P-40 Warhawk 300 ARF Highlights: Molded foam construction with panel lines and other scale details Factory-applied Flying Tigers "shark mouth" paint scheme Factory-installed 300 BL outrunner motor with propeller Factory-installed empennage, control horns and servo links Simple aileron/elevator controls require just two servos Quick release wing attachment Magnetically secured canopy hatch Extra prop and spinner included Quick, easy assembly Attractive display stand included P-40 Warhawk Specs: Wingspan: 25.6 in. (650mm) Length: 21.7 in. (550mm) Wing Area: 108 sq in. (7.02 sq dm) Radio: 4+ channels Servos: E-flite S-60 Speed Control: 10-amp brushless Recommended Battery: 2S LiPo Needed to Complete: 4-channel transmitter, receiver, 2 servos, ESC, battery and charger. Technical Specifications: Length: 21.7" Wingspan: 25.6" Flying Weight: 7 oz. Controls: Aile,
A thrilling re-creation of the Flying Tigers' legendary fighter On ...Hobby-Lobby
P-40 WARHAWK 300 ARF
A thrilling re-creation of the Flying Tigers' legendary fighter On paper, the P-40 was outclassed by many of the foes it faced. But in the hands of the pilots of the American Volunteer Group, the Warhawk was used to deadly effect against "superior" Zeros. Their exploits made the iconic shark-toothed grin of the "Flying Tigers" a symbol of victory for the Allies and cause for concern to any enemy pilot that encountered it. E-flite has captured the spirit of the Flying Tigers in this fun-to-fly re-creation of the P-40 that goes together fast and is small enough to fly in the park. It comes out of the box loaded with scale details like an authentic Flying Tigers paint scheme and molded panel lines. It also comes equipped with a factory-installed 300 BL outrunner motor that will provide plenty of power for warbird aerobatics like loops, rolls and Immelmans. Its simple 3-channel control setup means you only need to buy two servos, one for aileron and one for elevator, making it even more affordable to get flying. When you're not flying, you can show off its scale looks with the included static display stand. P-40 Warhawk 300 ARF Highlights: Molded foam construction with panel lines and other scale details Factory-applied Flying Tigers "shark mouth" paint scheme Factory-installed 300 BL outrunner motor with propeller Factory-installed empennage, control horns and servo links Simple aileron/elevator controls require just two servos Quick release wing attachment Magnetically secured canopy hatch Extra prop and spinner included Quick, easy assembly Attractive display stand included P-40 Warhawk Specs: Wingspan: 25.6 in. (650mm) Length: 21.7 in. (550mm) Wing Area: 108 sq in. (7.02 sq dm) Radio: 4+ channels Servos: E-flite S-60 Speed Control: 10-amp brushless Recommended Battery: 2S LiPo Needed to Complete: 4-channel transmitter, receiver, 2 servos, ESC, battery and charger. Technical Specifications: Length: 21.7" Wingspan: 25.6" Flying Weight: 7 oz. Controls: Aile,
A thrilling re-creation of the Flying Tigers' legendary fighter On ...Flying-Hobby
PHOENIX EDGE 130 HV (32V 130 AMP) BRUSHLESS ESC
| MIN | 2S LiPo MAX |
Helis:, 550 Class, or 600 Class (use external BEC or RX/servo power source; not included), Fixed wing:, 1.20, Input voltage:, Max continuous amperage at full throttle:, , BEC voltage (voltage regulator for powering radio and sevos):, User selectable choice from 5 to 8.4 volt output, BEC output amperage:, , Width:, 2.0" (50.8mm), Length:, 3.3" (83.6mm), Height:, 0.9" (23.2mm), Weight w/wires:, 5.3 oz (150.6g), Weight w/o wires:, 3.0 oz (86.6g), Programmability:, Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link USB adapter included in package) and freely downloadable Castle Link Windows software., Connectors:, , Tools needed for installation:, Soldering iron and solder to attach bullets to motor wires and battery connector to power wires.,
Product description Applications Technical Specs 130 amps* 5 amp peak** ...ReadyMadeRC
900MHZ BLUBEAM OMNI ANTENNA SET (RHCP) (IBCRAZY)
Note:, This amazing creation is built by Alex Greve (IBCrazy). The cloverleaf antenna design has proven to be one of the best antenna designs for FPV flying. These 900MHz antenna are right hand circular polarized, and can be used with linearly polarized antennas (with some loss) or a more perfect match are other right hand circularly polarized antennas. Not to be used with left hand circular polarized antennas., Radiation pattern (from 1280MHz antennas, should be the same for these):,
The BluBeam antenna set is a direct fit circularly polarized ...Flying-Hobby
PHOENIX ICE2 80A HV BRUSHLESS ESC
| ●Surge current | 80Amps |
| ●Supporting motor types | 2 poles to 10+poles in/outrunner brushless motors |
| ●Max Supporting input voltage | 50v(12s Li-Po/36 cells Nicad/NiMH) |
| ●Size | 71.12X33X22.9mm |
| ●Weight | 107.7g(With wires) |
| NOTE | Not including BEC. User need to provide the power for receiver and servo. |
Instructions:, Fearture:, ●Ready to fly out of the bag, but users can tap into serious computing capabilities by connecting them to Castle Link software using a Castle Link or upcoming Field Link programming card., Specification:,
●Comprehensive heli feature set, including direct entry governor mode, autorotation ...Flying-Hobby
SBEC 10A SWITCHING REGULATOR
| Current Output | Peak |
| Continuous | <12 volts input = 7 amps* |
| Length | 1.2” (30mm) |
| Width | 0.6” (15mm) |
| Height | 0.4” (10mm) |
| Weight | 11g |
Output Voltage:, Output 5.1 volts out of the package, user may set output voltage from 4.8 to 9 using the Castle Link (sold separately)., Input Voltage:, 5v to 25.2v (2S to 6S LiPo),
<24 volts input = 5 amps**Ratings are determined with a ...Flying-Hobby
MIKADO LOGO 600 3D ELECTRIC HELICOPTER KIT - FBL OPTIONS
| Specifications | - Motor mount |
| - Rotor diameter | 1250mm to 1450mm |
| - Rotor blades | 600/620/650mm |
| - Main gear ratio | 8,1 |
| - Weight | 3,2 kg and up |
| - Battery | 6S to 10S LiPoly |
| pinion | MIK4412 12 tooth |
| Cyclic servos | FutabaBLS 451 or JR 8717 or BLS 253 |
| Tail Servo | Futaba BLS 251 or JR 8900G |
| ESC | Kontronics Jive80HV or Casle Creations Ice 80 HV |
| Battery | 10cell 5000MAH |
Super light, extremely rigid mainframe:, The mainframe consists of a right and a left frame made from glassfiber-reinforced polymer. A number of components which are usually separate parts are fully integrated into this frame, and do not have to be bought separately, for example bearing case, battery tray and servo mounting plate. There is ample space for any brand of available battery. The mainframe offers enough room for motors of up to 56 mm in diameter., Herringbone main gear:, Experience of previous years shows that conventional gear trains have reached their limit with regard to performance. The increasing power made available by latest Lipoly batteries calls for new concepts. We are proud to present this new gear technology, which includes herringbone gears. This type of gear has never before been used in a model helicopter., Its main advantages are:, - Considerably more transmission efficiency - Very smooth running - Extremely low noise level, Suggested Kit Combination:, , motor:, Scorpion HK-4035-560, Note:, Mikado LOGO kits do not come with a pinion, tail blades, or main blades. You must choose your own pinion that matches your motor to obtain the headspeed that you desire. Please use our headspeed calculator if you need help figuring out what pinion you need!,
This is the Logo 600 V-Bar Flybarless version kit. We’ve ...Flying-Hobby
CAPACITOR PACK (12S MAX, 50.0V, 1100UF)
Helis:, CC CapPack is highly recommended for all 500 class and larger heli applications where Y harnesses and long wires can bleed voltage and hard collective pulls can strain even the most powerful batteries., Cars/Trucks:, With their high torque requirements – going from 0 to 100% throttle isn't easy on controllers or batteries - RC cars and trucks put enormous loads on brushless power systems. Use CC CapPack to help your system power through the abuse., Aircraft:, Larger electric power systems lead to larger electric powered aircraft, and sometimes the distance between the battery pack and the ESC grows beyond the length of the wires installed on the components. Adding wire also adds inductance, which can increase the ripple voltage in a system. CC CapPack essentially negates the ripple caused by the addition of up to 8 inches of length to the battery wires., Note: All Castle controllers with data logging capabilities can report the ripple voltage they encounter during use. Ripple voltage peaks should always be less than 10% of the total pack voltage; the smaller the ripple voltage the better. If an application exhibits more than 10% ripple voltage under peak loads, the user should consider using higher discharge (C Rating) batteries, shorter wires, higher current connectors, better gearing or a smaller load.,
CC CapPack is useful in all brushless motor applications, where ...Flying-Hobby
MIKADO LOGO 600SE ELECTRIC HELICOPTER KIT - FBL OPTIONS
| Specifications | - Motor mount |
| - Rotor Blades | 600mm to 690mm |
| - Main gear ratio | 8,1 |
| - Weight | 3,2 kg and up |
| - Battery | 8S to 10S LiPoly |
| pinion | MIK4411 11 tooth |
| Cyclic servos | FutabaBLS 451 or JR 8717 or BLS 253 |
| Tail Servo | Futaba BLS 251 or JR 8900G |
| ESC | Kontronics Jive120HV or Casle Creations Ice 160 HV |
| Battery | 10cells or 12cells 5000MAH |
Superlight, extremely rigid mainframe:, The mainframe consists of a right and a left frame made from glassfiber-reinforced polymer. A number of components which are usually separate parts are fully integrated into this frame, and do not have to be bought separately, for example bearing case, battery tray and servo mounting plate. There is ample space for any brand of available battery. The mainframe offers enough room for motors of up to 56 mm in diameter., Herringbone main gear:, Experience of previous years shows that conventional gear trains have reached their limit with regard to performance. The increasing power made available by latest Lipoly batteries calls for new concepts. We are proud to present this new gear technology, which includes herringbone gears. This type of gear has never before been used in a model helicopter., The main advantages of the new Herringbone gear design are:, - Considerably more transmission efficiency, Very smooth running, Extremely low noise level, Suggested Kit Combination:, , motor:, Scorpion HK-4035-560(10cell) or xera-4030-560 (10cells), Note:, Mikado LOGO kits do not come with a pinion, tail blades, or main blades. You must choose your own pinion that matches your motor to obtain the headspeed that you desire. Please use our headspeed calculator if you need help figuring out what pinion you need!,
This is the Logo 600SE V-Bar Flybarless version kit. The ...HobbyWireless
1.3GHZ MAD MUSHROOM (RHCP) IBCRAZY
| Gain | 1.5dbic |
| Axial ratio | 0.73 |
| Bandwidth | XX-XXMHz (It is really wide band!) |
Details:, Another amazing creation is built by Alex Greve (IBCrazy). The Mad Mushroom is the latest omnidirectional circular polarized antenna from Video Aerial Systems. It is right hand circular polarized, and can be used with linearly polarized antennas (with some loss) or a more perfect match is another right hand circularly polarized antenna. Very wide band and can be used as a transmit or receive antenna. Not to be used with left hand circular polarized antennas.,
This antenna has a balun on the feed line. The ...HobbyKing
TBS MINI PROGRAMMABLE SOUNDUNIT
| Can be fully configured with free PC software | Download from the files Tab below |
| Dimensions | 55x25x10mm |
| Note | Extension wire shown in the photo not included. |
Features:, Fully customer programmable., Technical Spec:, Supplyrange:, 3.5~12V (from receiver), Internal amplifier:, 1.2W at 8 Ohm and 5V supply, Switching outputs:, Minus switching, max. 12V/0.5A each, Weight:6g,
This soundunit is developed specially for electric powered airplanes. And ...5 Reviews
Hobby-Lobby
THUNDERBIRD 18A ESC
Technical Specifications:, Voltage Range:, 4V - 15V, BEC Amperage:, 3A BEC, BEC Type:, Linear, Constant Current:, 18 Amps,
From mini planes to aerobats, if you want affordable reliability, ...Hobby-Lobby
THUNDERBIRD 18A ESC
Technical Specifications:, Voltage Range:, 4V - 15V, BEC Amperage:, 3A BEC, BEC Type:, Linear, Constant Current:, 18 Amps,
From mini planes to aerobats, if you want affordable reliability, ...